Thread Rolling Machines Comparison

A Side-by-Side Look at Applications & Advantages

  Specifications 200 215 35 236 280 320 380 440 645 740 840 1015HS 2830HS 4840HS
  Type of Feed: Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed Infeed & Thrufeed
  Capacity
  Max.   Diameter 2" 2" 3" 2-1/2" 2-1/2" 3" 4" 4-1/2" 6" 8" 24" 1-1/8" 4" 6"
  Min. Diameter                       5/8" 7/8" 1-1/4"
  Rolling   Pressure Adj. to 24,000 lbs. Adj. to 35,000 lbs. Adj. to
40,000 lbs
Adj. to 60,000 lbs. Adj. to 60,000 lbs. Adj. to
 80,000 lbs.
Adj. to 100,000 lbs. Adj. to 125,000 lbs. Adj. to 235,000 lbs. Adj. to 340,000 lbs. Adj. to 650,000 lbs. Adj. to 25,000 lbs. Adj. to 60,000 lbs. Adj. to 150,000 lbs.
  Motors
  Spindle Drive 15 HP 20 HP 30 HP 40 HP 40 HP 40 HP 40 HP 60 HP 75 HP 75HP 100 HP 15 HP 30 HP 50 HP
  Hydraulic N/A N/A N/A 3 HP
30 Gal
N/A 5 HP
50 Gal
N/A 5 HP
50 Gal
10 HP
80 Gal
20 HP
80 Gal
30 HP
100 Gal
3 HP
50 Gal
3 HP
50 Gal
7-1/2 HP
50 Gal
  Coolant 1/4 HP
50 Gal
1/4 HP
50 Gal
1/4 HP
80 Gal
1/4 HP
50 Gal
1/4 HP
50 Gal
 
1/4 HP
80 Gal
1/4 HP
75 Gal
1/2 HP
120 Gal
1/2 HP
120 Gal
3/4 HP
200 Gal
3/4 HP
200 Gal
1/4 HP
120 Gal
1/4 HP
120 Gal
1/2 HP
300 Gal
                              
  Dies
  Max.   Diameter 6" 6" 7-1/2" 7-5/8" 8" 8" 8" 9" 10" 12" 16" 4-1/2" 6-1/2" 9"
  Max. Die Face Width 3-1/2" 4-1/2" 6" 6" 5-1/2" 5-1/2" 5-1/2" 8" 7-1/2" 12" 15" 2-3/8" 3-1/2" 8"
  Standard   Spindle Size
  (Other Sizes   Available)
1-1/2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 3" 3-1/4" 4-3/4" 5-1/2" 1-1/2" 2-1/4" 3-1/4"
  Spindle   Speeds Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable 6 Speed Manual 6 Speed Manual 4 Speed Manual
  Spindle RPM
(Other Speeds Available)
45 - 200 40 - 180 30-150 50 - 200 1-100  20 - 120 1-100 10 - 170 10 - 125 5-70 2 - 50 150 - 490 41 - 217 31 - 83
  Floor Dimensions
  Width 56" 56" 62" 77" 84" 76" 94" 92" 87" 158" 216" 78" 86" 96"
  Length 66" 84" 84" 87" 88" 96" 92" 102" 113" 155" 255" 88" 78" 114"
  Height 62" 51" 75" 67" 77" 52" 77" 68" 52" 106" w/crane 106" w/crane 66" 72" 96"
  Net Weight 3,000 lbs. 4,500 lbs. 7,600 lbs 8,500 lbs. 10,500 lbs. 10,000 lbs. 12,500 lbs. 16,000 lbs. 21,000 lbs. 46,000 lbs. 96,000 lbs. 9,500 lbs. 12,000 lbs. 25,000 lbs.
  Voltage All models wired to NFPA 79 standards for operation on 240 or 480 volt, 3 phase, 60hz. Other voltages available at additional cost.
  Fixturing Please be advised that fixturing and additional guards may be needed, depending on job being rolled. Tesker Manufacturing Corporation assumes no liability for fixturing or guards designed, manufactured or installed by anyone other than Tesker Manufacturing Corporation.
    
Specifications subject to change without notice.